IMG_4116
IMG_4116IMG_4117IMG_4128IMG_4129IMG_4130IMG_4131IMG_4132IMG_4133IMG_4135IMG_4137IMG_4139IMG_4140IMG_4146IMG_41101SXxHuKaTcK81oM4UqCQxA_thumb_2cefIMG_4113IMG_4108IMG_4106IMG_4149IMG_4150

Bentley Continental R Mulliner – WideBody 420 HP / 650 lf/ft

SOLD



Enquire about Vehicle

Category:

Vehicle Description

Bentley Continental R Mulliner “WideBody”  420 HP / 650 lb/ft

Silver Tempest with Fireglow Hide to be as Grainy and as Patterned as Possible.  Twin Stitched Seats. Drilled Brake and Accelerator Pedals.

Very low miles at just 20,000.   Close to “As New” condition throughout.

100% corrosion free having spent the 1st 15 years in Barcelona

Collection Condition. The closest we have seen to this in comparable condition is another Continental R Mulliner with 2,500 miles recorded which sold at + £ 170,000 in Feb 2019 and then came to Phantom Motors for Major Service requirements and a  Global refresh.

 

 

Sold by Jack Barclay Ltd 05 07 1999 Reg. T332 GXP.

Date of 1st registration 05 07 1999

Place of registration UK – Cleveland

Number of owners from new 3

 

1st owner from 1999 to 2015 (Mr. James Bradwell) The car was kept in Spain for some time as there are 4 services from official dealer in Barcelona.

1st Service Cars Barcelona at 6,423 miles on 08-03-2000

2nd service Cars Barcelona at 8,540 miles on 05-10-2000

3rd Service Cars Barcelona at 10,469 miles on 02-10-2001

4th Service Cars Barcelona at 12,044 miles on 11-02-2013

5th Service Royce Service & Engineering at 16,755 miles on 23-03-2016

6th Workshop Phantom Motors at 20,000 miles on 15-08-2017

 

2nd Owner was John Cook ex Jack Barclays. (Barclay Square- London). John Cook ran Sunningdale Motors (Sunningdale near Windsor – Berkshire).

 

Last owner (3rd Jason Yates) had the car for 1 year before he passed away. We bought the Bentley from Mr Yates Estate Executors.

 

Last invoice from Royce Service & Engineering (Bentley Specialists) in August 2016 at 16,755 miles for global overhaul £ 9,777.88 GBP to include Service, brake pads front & rear. Bleeding hydraulics, exhaust mount. Power steering work etc.

 

Further works completed by Phantom Motors……….Front suspension height settings and geometry setting. Re-setting of rear spring heights and balancing self-levelling suspension pressures (ride height). New tyres. Resetting of front seat drive cables. Axle oil change. Polish coin box cover. Replace 1 headlight lens. Apply Armourfend (clear film) stone chip protection to rear wheel arches.